Skip to main content

Muffler options

My Cyclex 4-2-1 exhaust system has been on for roughly 2 years now and I really dislike the raspy buzzy ring of the exhaust note above 4k RPM. I've been searching for a cheap alternative but have been unable to find something suitable.

2007 Suzuki GSXR 1000 Canister muffler, doesn't fit right



Moroso Spiral Flow muffler, is raspier than the original MAC muffler

Comments

Post a Comment

Popular posts from this blog

how to open your door when neither handle works

My recently acquired 2003 Honda Accord EX 4 cyl had a faulty door lock actuator in the front passenger side door.  Here is a run down of what I did wrong in case you find yourself in a similiar situation. Shopping for door lock actuators - Prices go from around $10 to over $40. I mistakenly ordered a pair of door lock actuators ($20 for left and right) for a coupe and received 2 black actuators that were not sized correctly for my 4 door sedan which has smaller white actuators. I did not discover the problem until after I had the door panel off and the actuator removed from the door latch assembly. It was hot, the flies were landing on me and drinking my sweat and I just wanted to button the door back up and stay cool inside so I searched for the closest parts store that had the part in stock and went there to buy it for $45. (I did return the 2 wrong parts but did not get a full refund, but I'm ok with that...$16 back in my pocket is better than $0) Reassembling the door l
1 comment
Read more

Universal Speedometer/Tachometer install

I wanted to replace my original speedometer and tachometer for something more compact. I'm not sure why, but the original 85mph speedometer always bothered me. I guess I felt like the bike deserved better even though I've only pinned it once in 10 years of riding.   After casually looking around and almost pulling the trigger on a cheaper universal speedo with an analog sweep needle for the tach, I stumbled across this product. It can be found in all the usual places such as Amazon and eBay but it's usually buried behind 2 or 3 pages of search results with vastly different prices ranging from mid 40s to mid 80s (US$). The description typically includes a listing of what each wire is intended to be connected to, but in typical fashion for these kinds of imported products the English translation leaves a lot to be desired. For example: the product detail notes: "Oil Quantity Indicator" as one of the display areas, but they really mean fuel level (my bike doesn't
Post a Comment
Read more

GSX-R750 Caruretor swap for the CB750c Part1

As an owner of an early 80s cb750, it quickly becomes obvious that the CV carburetors on these old motorcycles require the original airbox to run properly. It would seem like a minor price to pay for the reliability and dependability that we get with the design since no jetting changes are needed as we change altititude or swap exhausts. The constant vacuum (CV) design automatically compensates for the difference and keeps the bike running happily. Just don't change the airbox or use anything other than the original style airfilter. I got my bike running perfectly so I'm either a glutton for punishment or just a dumb geek who can't leave stuff alone. "If it aint broke, fix it until it is" might be my motto. People tell me I wouldn't be happy with a new bike because there would be nothing to fix. Maybe it's just a way for me to keep my mind busy so I don't have to think how much I hate my job. I started noticing some posts from people on cb1100f
1 comment
Read more