Skip to main content

Posts

Back to stock(ish) part 4

I had to pull the OEM carbs becase she was behaving like I had an air leak.  Under acceleration it was slow slow slow and then when the RPM finally hit 7krpm, she would start to accelerate hard. I had to pull everything out to check for leaks and I did find a few holes in the airbox which I plugged up. I also found a few of the slides on the OEM carbs a tad sticky due to small burrs that I sanded out of the slide shaft/body.  Hopefully these few items and better sealing carb insulators will resolve any issues next time the OEM carbs go back on. I had also wanted to try out a modification to the gixxer carbs that I read about which should help me with my rich idle problem.  Basically I had to drill out the pilot airjet 1 size larger (based on my harbor freight drill bit set) at the pod side of the carb intake to allow a little more air in.  It definitely has affected the carb's state of tune because I'm running too lean now even at 3.5 turns out There is a...

My first Bike trip

  2 out of 5 of my regular riding friends decided to go for our first longish ride together. We covered roughly 900 miles over 3 days. Me: new bike, newish rider, 3+ years experience Rider 1: new bike, experienced rider, 20+ years experience Rider 2: newish bike, experienced rider, 10+ years experience Rider 3: newish bike, newish rider, 5+ years experience I've been dealing with back pains, wrist pains and neck pains both on an off the bike.  My wife also became a pain in the ass with her notion that our trip was a waste of time since we could just ride our regular haunting grounds again or do another state park closer to home. Probably the most mechanical of the bunch (there are 2 other riders with more mechanical ability than me but they couldn't make the trip) Rider 1 purchased a new used bike and was eager to try it out on a longer trip. He had no family issues since he was riding before he had a family. Rider 2 has a serious yearning to ride anywh...

Back to stock(ish) part 3

First ride with the original carbs after about 1 year and the seat-of-the-pants performance meter indicates that the cb750c is sloooow. I'm sure my performance meter needs recalibration after riding around on the new Street Triple, but I'm pretty sure the old girl was not this slow with the gixxer carbs. I'm sure I need to do some troubleshooting, maybe check for intake leaks or pull the carbs and see if anything is wrong. Otherwise, with the standard mac mufflers she sounds angry. Loud, slow, and angry, but I love the way she looks and like the riding position. I'm going to continue riding her this way looking for any opportunities to get her running the way she was meant to run. Had 2 fuel leaks after re-installing the original carbs. #4 float valve was leaking and now appears to be sealing after dropping the bowl and fingering the floats. Then #2 bowl gasket was leaking because the gasket got pinched on reinstall. Seems like my choke is not doing t...

Muffler options

My Cyclex 4-2-1 exhaust system has been on for roughly 2 years now and I really dislike the raspy buzzy ring of the exhaust note above 4k RPM. I've been searching for a cheap alternative but have been unable to find something suitable. 2007 Suzuki GSXR 1000 Canister muffler, doesn't fit right Moroso Spiral Flow muffler, is raspier than the original MAC muffler

Back to stock(ish) part 2

In part 1 of Back to stock I decided I would give the original carbs another run to see if I wanted to spend more money getting the GSXR750 carbs properly tuned for my bike. First order of business was to clean the old carbs before I mounted them back just in case I had a little build up in the tiny idle jets. During re-assembly I spent a few minutes to understand the accerator pump mechanism on carb#2 and discovered that I had been starting my bike wrong all along. When I had switched over to the gixxer carbs I thought they helped my bike start much easier because I was getting the engine to fire within 2 cranks reliably where the OEM carbs took minimum 3 tries on most cold starts. I discovered that the accerator pump mechanism squirts a healthy dose of fuel into the carbs only on full throttle twist, something I never did. In the past, I always pumped the throttle 2 or 3 times but I never gave the throttle a full twist and so never actually primed the car...

Upgrades - The slippery slope

Some people buy a new bike and the first thing they do is "upgrade" it. First thing to go is the exhaust. Louder, less restriction, less weight. It seems so rudimentary that no one asks why or who buys all the original exhausts. Within days of the upgrade you will inevitably see running issues because the carefully engineered fuel maps are out the window. Time to spend money on fixing the tune with engine motronics, maps, free flowing airfilters. The perceived notion of improved performance due to a lighter wallet is rampant. The "It's loud and I'm using alot more gas so it must be faster" syndrome. "I can't ride without earplugs because my head gets numb from the noise." Then the imperceptible loss of the enjoyment of the ride because of the loud popping, the poor gas mileage, the friends who won't ride with you because of the noise. The bike winds up for sale with low miles and a poor running engine. Keep it stock for a year before you up...

The Frustrated Shade tree mechanic

I've never labeled myself a mechanic so perhaps the title is a bit misleading. In January, I posted about the OBD2 problems with my van and the past few weeks I've been struggling with a thermostat replacement. At some point, I came to the conclusion that I needed to change the thermostat on my van since it's been running cool for several months. I reasoned that the drive cycle could not activate if the coolant temperature was not getting into the expected operating range. This should not have been a big deal, I've changed a thermostat before in the 200. For some reason, I could not get it to stop leaking when I put it back together. After 5 reinstall and start tries, changing the position of the gasket and using sealants and gasket makers, I found that I had cracked the thermostat housing likely during my first reinstall attempt. Not a huge deal, I found a used housing on ebay and it had all the attached hoses on it for $65 including free shipping. After a few days, th...